Router Table Features Laminated Cabinet Functionality., Bosch Power Tools & Acc

Router vendors responding to growing attacks – E & T Magazine

Anthony Grierco

Mt. Prospect, Ill. (March 30, 2006) – Bosch Power Tools and Accessories announced the release of the RA1171 Benchtop Router Table. The cabinet-style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.
For the original version including any supplementary images or video, visit

Using the Dremel Shaper/Router Table and Conclusion |

Dremel Shaper / Router Table Review Using the Dremel Shaper/Router Table and Conclusion

Click to enlarge As well as cut depth, youre able to adjust the angle of the guide bar and protective shield to your requirements, depending on the finish youre trying to achieve or the depth of material youre dealing with. The main limitation of the table is its size, which will limit the length of materials you can easily pass by/over the cutting/sanding bit. Click to enlarge Using sanding bands proved to be a doddle and we were able to achieve smooth curves on the corners of acrylic sheet much easier than with a rotary tool alone or with the Dremel Workstation. With soft materials, it was quick and easy to shave off a specific amount off one edge, while routing bits were able to deal with harder materials. Leaving the rotary tool and cutting bit to do most of the work, we didnt see any signs of flaws in the cuts due to tool movement; so long as you dont apply too much pressure, the Router / Shaper is able to provide clean, accurate cuts. Conclusion In reality, calibrating the Dremel Router / Shaper proved to be a bit of a pain, but its likely youll only have to do this once each time you come to do some routing.
For the original version including any supplementary images or video, visit

Its view is that DDoS attacks represent the single most significant threat to telco and service provider networks, with the number of attacks including UDP, ICMP (Ping), SYN flood, Nukes, Ping of Death, Smurfs, Slowloris, and Zero-day (the last classifying unknown or new attacks) growing in both volume and scale. Both DoS and DDoS attacks are usually measured by the volume of gigabytes, megabytes, bytes, or packets per second, which are pushed to a particular device in the hope of flooding it to a standstill. “We have seen very high bandwidth, 100Gbit/s plus attacks increase significantly by up to 30 per cent in 2013 and 2014, often peaking at 350Gbit/s,” reveals Nick Williams, Brocade’s EMEA senior product manager for data centre IP. “It is not new, but different approaches to how those [DDoS] attacks are performed have become apparent.” Brocade has harnessed innovations like software-defined networking (SDN) technology to develop an automated DDoS solution which uses version 1.3 of the OpenFlow protocol.
For the original version including any supplementary images or video, visit